Wild Berry IPA Recipe

Another experimental beer in the carboy. Today(10/13/19) brewed a wild berry IPA, using the wild berries(some people call them wine berries) from my parents property. After the pumpkin beer was a partial success, hoping this one will be better!

Recipe:
7 lb pale malt
1 lb 5oz 10 row barley
~2oz nugget fresh leaf hops
~0.5oz cascade fresh leaf hops
1oz chinook pellet hops
~6 cups reduced wild berrys
1 wirflock tablet
White labs Belgian strong ale yeast

60min: chinook, 1/4 cascade/nugget mix
45min: 1/4 cascade/nugget mix
30min: 1/4 cascade/nugget mix
15min: wirflock tablet, 1/4 cascade/nugget mix

Racked beer on top of wild berry juice.

Smart coffee table

I couldn't find any pictures of the before, but here is the outcome from restoring/updating my old ugly coffee table. It used to be all one color, a light brown stain. With the help from the girlfriend, we sanded the whole thing, then I painted the legs white and the stained the top with the leftover stain from the farmhouse table project.

Of course there had to be more to the project than that... I added a power strip, wireless phone charger, and some RGB lights under it. You may ask why does a coffee table need lights. It doesn't. But I recently discovered the blynk IOT app and I was looking for an excuse to control RGB led strip from my phone AND I already had power going to the table. For the power controller I used a nodeMcu that I bought off ebay for 2$ and some mosfets I had laying around. If I were to do it again I would just buy the RGB controller, lot of work for this useless feature(well its cool?)

Final product!

Built in outlet

NodeMcu and mosfet board

LED strip and all wiring

Brewpot water level sensor

Working on a new addition to the homebrewing setup. I want to be able to detect water/beer levels in the pot. This circuit will read multiple probes to detect which ones are in water and report the status back to the raspberry pi over the usb serial connection.

I started with a simple circuit I found online, then added my own twist. Had to relearn eagle cad, then sent the eagle project file to Oshpark to get some PCB's made.

Schematic

Board Layout

Final PCB assembled(mostly)

   

Next step will be to get my 3D printer working so I can print the following enclosure that I drew up in Fusion 360.

Shed finished!!

Last post on the shed. Staining is 99% done, doors finished, trim is mostly finished. But its usable and just waiting on the ATV to be fixed before it moves into it's new home.

Farmhouse table

Recently finished up a farmhouse table for my girlfriends new apartment. It's made from Douglas fir and pine wood purchased at the local home depot. Wanted to go with a nice hardwood tabletop but that would have doubled the total price.

We used the plans from the following website. But substituted 4 2x10 boards for the tabletop instead of the concrete tabletop. Also shortened the table and bench to only be 5 ft long.
https://theinspiredworkshop.com/x-base-outdoor-concrete-bench/

I believe the stain used was a "Kona" color:
https://www.homedepot.com/p/Varathane-1-qt-Kona-Premium-Fast-Dry-Interior-Wood-Stain-266161/203332251

Table in the new apt

Sanding an staining...

Resin wood table

Started making a resin wood table. Started with a 1in wood slab, cut in half, and poured a epoxy resin with blue pigment around it. In a week or so will sand down and put a final clear coat on top.

Shed stain and trim

Lots of progress was made this christmas weekend.
- The roof plywood triangle pieces were cut and screwed on.
- Stain/sealer was applied to "most" of the plywood siding
- 1x4 trim was cut, painted, and nailed on the front of the shed
- made a plywood ramp for the entrance

Next step will be to finish staining, more trim work, and make the doors